	Как заказать инструмент? Правила работы интернет-магазина Тарифы на доставку Защита конфиденциальности
Wohlhaupter Seco Iscar Kennametal

Твердосплавные пластины

Iscar - Твердосплавные пластины

В Корзине 0 товаров

Каталог товаров > Iscar > Твердосплавные пластины

Internal, Double-Ended Precision Threading Inserts for 60° Partial Profile, for General Applications

GEPI-MT

60° Partial Profile Threading Inserts, for Swiss Type Automatics and Small CNC Lathes

SCIR/L-B/F-MTR/MTL

Precision Ground, ISO Metric Full Profile, Double-Ended, External Threading Inserts with a Chipformer

TIP-P-ISO

External 60°, Partial Profile, Laydown Threading Inserts, for General Industry

ER/L-60°

Internal Threading Inserts, for Threading 60°, Partial Profile in 8 mm and Larger Holes

GIQR/L-MT

Mini Indexable Inserts, for Threading 60°, Partial Profile, in 5.2 mm and Larger Holes

UMGR-A60

Internal 60°, Partial Profile, Laydown Threading Inserts, for General Industry

IR/L-60

Thread Milling Inserts for External ISO Metric Profile

MT-ISO(External)

External & Internal Whitworth (BSW, BSF, BSP) Helical Thread Milling Inserts, for Fittings and Pipe Couplings

MTH-W(Internal and External)

Thread Milling Inserts for Internal ISO Metric Profile

MT-ISO(Internal)

Internal Helical Thread Milling Insert for ISO Metric Threads

MTH-ISO(Internal)

Inserts for DR Drills and Boring Bars

XOMT-DT

Inserts for DR-MF Multifunction Tools, Two Cutting Edges, for Hard Materials and Interrupted Cut

XCMT-MF

Drilling General use Heads for DCM Drills

IDI-SG

Exchangeable Drilling Bits for DCN Drills, for Stainless and High Temperature Alloys (ISO M Materials)

ICM

Exchangeable Drilling Bits with Coolant Holes, for Carbon and Alloy Steel (ISO P)

IDP

Inserts for DR Drills, for General Applications at Medium-to-High Feeds

SOMT-DT

Inserts for DZ Drills with Serrated Cutting Edges for Chip Splitting for Low-to-Medium Feeds

WOLH-GF

Inserts for DSD-EA / DSD-IA Drilling Heads

XPMT-UB

Inserts for DSD-EC / DDD-EC / DSD-IC / DSC-EC / DSC-IC / DSC-EA Drilling Heads

NPMX 0803 RB/RG

Inserts for DSD-EI / DDD-EA Drilling Heads

NPMT-R1

Inserts for DSD-EF / DDD-EF Drilling Heads

NPMT-L2/R2

Insert used on Chamfering Rings

XOGX-DT

Chamfering Insert used on a Cylinder, with UNICHAMDRILL Drills for Chamfering and Drilling in One Operation

XCGT-DT

Chamfering Insert for Pre-Thread Hole Drills, for DCT Drills

AOMT-45DT

Octagonal Double-Sided Inserts with 16 Cutting Edges

ONMU/ONHU-05

HELIDO Wiper Insert with a Single Cutting Edge

S845 SXHU 1606-W

Octagonal milling inserts.

OFMT 07

16MILL octagonal, double-sided face milling insert used on cast iron.

ONMU/ONHU-08-TN

Super positive, square milling inserts used for 45° finishing and medium machining on soft materials.

SEKT-AF-R

TANGMILL tangentially clamped insert with a positive rake angle, leaves clean and sharp edges on cast iron components.

LNKX 150608AN-N PL

CHAMMILL octagonal indexable milling inserts for 45° facing.

O45MT

HELIMILL inserts with a serrated cutting edge for chip splitting, used for roughing applications on 45° milling cutters.

ADMT 1505ADR-HS

MILL2000 inserts for 45° heavy face milling applications.

3M AXKT 2006ADTR

Double-Sided Inserts, 6 Cutting Edges, for Fast Feed

H600 WXCU 08

Milling inserts for very high feed machining up to 3.5 mm/tooth at low depth of cut.

FF WOMT/FF WOCT

Square, Double-Sided Inserts with 8 Cutting Edges

S865 SNMU 1305ZNTR

Flat rake face, general use milling inserts.

SEAN-AF..

HELI2000 insert with a sharp cutting edge, used for semi-finishing and finishing applications.

HM90 APCT 1003

HELI2000 general use milling inserts with various corner radii.

HM90 ADKT 1505

Flat rake, general use milling insert. The -42 design has an improved tool life.

SPKN ED..

MILL2000 inserts for heavy milling applications.

3M AXKT 1304

Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

H490 ANKX/ANCX-12

Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

H490 ANKX/ANCX-17

HELITANG- tangentially clamped inserts with 4 helical cutting edges.

T490 LNMT/LNHT 0804

HELITANG- tangentially clamped inserts with 4 helical cutting edges.

T490 LNMT/LNHT 1306

Tangential Insert, 4 Cutting Edges

T490 LNMT 1607

Tangentially clamped insert with a very positive chipformer and a reinforced cutting edge.

LNKX/LNMT 1106

A TANGMILL tangentially clamped inset with an IB85 PCBN brazed tip. Used for machining hard materials.

LNAW (CBN)

QUAD2000 general use square inserts, having 4 right-hand or 4 left-hand cutting edges.

QPMT 100408PDTN

Superpositive, milling inserts for aluminum, S.S., high temp alloys.

SDMR-HQ

General use insert. Super positive chipformer, peripherally ground. Used for machining aluminum, titanium and magnesium.

HP ANCR 0702PNFR

HELIPLUS 19 mm cutting edge milling inserts for machining aluminum.

HP ADCR 1906

HELIPLUS inserts, featuring two 22 mm long cutting edges for general high shoulder milling applications.

HP ADKT/ADCT 2207

11° positive triangular general use milling inserts.

TPKN/TPKR

HELIALU super positive and polished rake inserts used for machining aluminum and high temperature alloys.

HM90 APCR 1605..R-P

Super positive and polished 22 mm inserts, with various corner radii used for machining aluminum and high temp. alloys.

HM90 APCR 2206..R-P

HELIALU super positive inserts with a polished rake. Used for machining aluminum and high temperature alloys.

HM90 AXCR 1505

2 Cutting Edges (Fully Effective) Inserts for Shouldering, Slotting, Drilling and Countersinking Applications

HCC-QF

Tangential Insert, 2 Cutting Edges

T290 LNMT/LNHT 0502

Tangential Insert, 2 Cutting Edges

T290 LNMT/LNHT 1004

QUAD2000 general use insert with 4 right-hand or 4 left-hand cutting edges.

QOMT-HQ

11° Positive Triangular Inserts. Positive Chipformer, Low Cutting Forces, for Internal Turning and Finishing

TPMT

General use insert for 45° endmills.

SDMT-AD-N

Toroidal insert with a variety of corner radii, used for machining fillets and for machining next to steep walls.

HTR-QF

Double-Sided Inserts, 6 Cutting Edges, for Fast Feed

H600 WXCU 05

Double-Sided Inserts, 6 Cutting Edges, for Fast Feed

H600 WXCU 04

A Fully Effective, Serrated Insert with Four Indexing Orientation Options

RCMT/RCMW/RCCW-FW

Toroidal bull nose, peripherally ground inserts with 4 cutting edges.

CNHT

220° Spherical Cutting Profile Inserts. Used for Profiling, Up and Down Ramping, Steep Profiles and Undercutting

HBR-QF

Round milling inserts with chip formers. Star shaped bottom for indexing and preventing insert rotation.

RXMT

The DROPMILL insert has a straight cutting edge tangent to a round corner.

BCR

Ball nose 8-10 mm diameters profiling inserts.

CR-D10

Ball nose 8-10 mm diameters, profiling inserts.

CR-D080/.31

30-50 mm diameters ball nose profiling inserts.

CR-D30-50

Inserts for slotting (MINI-TANGSLOT).

LNET 08

Inserts for slotting (TANGSLOT).

LNET 12-TN

CHAMMILL round inserts with a flat rake, used for profile milling.

R90CW

Precision Inserts for Internal Grooving and Recessing

GIPI

SELF-GRIP slitting inserts.

GSFN

SELF-GRIP slitting inserts.

GSAN

A 87° rhombic, 7° positive flank insert, used for plungers.

XCMT-TR

Double-Sided Insert with Four 80° Corners for Finishing Applications

QNMG-NF

Positive 7° Clearance, Four 80° Cornered Insert with a Chipformer for Finishing

QCMT-PF

Square, Positive Inserts with 80° Corners, for Finishing. (CHAMELEON Multifunction Pocket System)

QC95MT-SM

Trigon, Double-Sided Insert, for Semi-Finishing and Finishing Applications

WNMG-NF

Double-Sided, Trigon Insert with High Helical Cutting Edge for High Metal Removal Rates

WNMX-HTW

80° Rhombic, Double-Sided Inserts, for Super-Finishing. Controls Chip Flow at Very Low Feed and Depth of Cut

CNMG/CNGG-SF

80° Rhombic, Double-Sided, Ceramic Inserts with a T-Land, for Machining Cast Iron and Hardened Steel

CNGN-Ceramic

80° Rhombic, Double-Sided, Dimpled Ceramic Inserts with a T-Land, for Machining Cast Iron and Hardened Steel

CNGX-Ceramic

80° Rhombic, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning

CCMT/CCGT

80°, Single-Sided, Rhombic Inserts, for Finishing. (CHAMELEON Multifunction Pocket System)

CC95MT-SM

Double-Sided, Square Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

SNMG-PP

Square, Double-Sided, without Chipformers, Dimpled Ceramic Inserts, for Short Chipping Materials

SNGX-Ceramic

Square, Double-Sided Ceramic Inserts, without Chipformers, for Short Chipping Materials

SNGN-Ceramic

Square 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum

SCGT-AS

Tangential Insert with 4 Cutting Edges and a Positive Rake Angle, for High Metal Removal Rates

LNMX-HT

Precision, Positive 8° and 12° Clearance, 80° and 84° Trigon Inserts with a Chipformer for Finishing Applications

WPEX

55° Rhombic, 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum

DCGT-AS

35° Rhombic, Positive Flank Inserts, for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys

VCGT 1303..-PF

Triangular, Double-Sided Inserts, for Super-Finishing. Controls Chip Flow at Very Low Feed and Depth of Cut

TNMG-SF

11° Positive Triangular Inserts. Positive Chipformer, Low Cutting Forces, for Internal Turning and Finishing

TPMR-PF

Triangular 7° Positive, Flat Rake Inserts, for Semi-Roughing Applications at Medium to High Feeds

TCMT-19

Tangentially Clamped Insert with a Wiper Corner Design, for High Production Cutting and Excellent Surface Finish

LNMX-WG

Double-Sided, 55° Rhombic Insert for Machining a Wide Range of Materials at Medium Cutting Conditions

DNMG/DNGG-TF

55° Rhombic, Double-Sided, without Chipformers, Dimpled Ceramic Inserts, for Short Chipping Materials

DNGX-Ceramic

55° Parallelogram Profiling Inserts

KNMX

55° Parallelogram Profiling Inserts

KNUX

35° Rhombic, Double-Sided Insert, for Semi-Finishing and Finishing Applications

VNMG/VNGG-NF

High Feed (up to 2.4 mm/Rev), Tangentially Clamped, Rough Turning Insert

LNMX-HF

Square Inserts with a Positive Chipformer, Low Cutting Forces, for Semi-Finish and Finish Applications

SPMR

Square, Single-Sided Inserts, for Finishing Applications. (CHAMELEON Multifunction Pocket System)

SC45MT-SM

Round, Single-Sided Inserts, for Semi-Roughing and Roughing Applications. (CHAMELEON Multifunction Pocket System)

RC90MT-SM

Round 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum

RCGT-AS

Round, 7° Positive Flank Inserts, Reinforced Cutting Edge, for Semi-Roughing and Rough Profiling

RCMX

Round, Double-Sided, Ceramic Inserts, for Machining Cast Iron and Hardened Steel

RNGN-Ceramic

CBN Round Inserts with a Flat Rake, for Short Chipping Materials such as Cast Iron and Hardened Steel

RCGX (CBN)

Pipe Skiving Inserts, Used to Remove the Burr of Welded Tubes

SNMX 150608R-..

Triangular 11° Positive Flank Inserts, for Short Chipping Materials

TPGB

Trigon, 5° Positive Flank Inserts with a Ground Chipformer for Finish Turning

WBMT

Triangular, 11° Positive Flank Inserts with a Ground Chipformer for Finish Turning

TPGX

Trigon, 7° Positive Flank Inserts with a Ground Chipformer for Finish Turning

WCGT

Miniature Indexable Inserts for Internal Turning

UMGR

Internal Grooving and Turning Inserts for Dmin 8 mm

GIQR/L 8

CHAMGROOVE Internal Back Boring & Profiling Inserts for Dmin 8 mm

GIQR/L-B18

Back Turning Inserts

SCIR/L-B/F-BR/BL

Turning Inserts with a Frontal Relief Angle

SCIR/L-B/F-AR/AL

Parting & Grooving, Single-Ended Insert, for Parting Bars, Hard Materials and Tough Applications

GFN-C

Parting & Grooving Single-Ended Insert, for Soft Materials

TAG N-J/JS/JT

Parting & Grooving Insert, for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts

DGN/DGNM-J/JS

Parting & Grooving, Double-Sided Insert with a J-Type Chipformer, for Steel

HGN-J

Parting & Grooving Single-Ended Insert, for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts

GTN-J

Utility Inserts for Turning and Grooving

GIMF

Utility, Full Radius Inserts for Turning, Profiling and Grooving

GDMY 318-159

Full Radius Precision-Ground Inserts for Machining Aluminum Wheels.

GIPA/GIDA 8 (Full radius)

Grooving and Parting Inserts

SCIR/L-B/F-N/L/R

Utility Inserts, for Internal and External Turning and Grooving

GEMI

Parting and Precision Grooving Pentagonal Insert for Soft Materials

PENTA 24N-J

Precision Inserts for External Grooving

GIG

Utility Inserts for External Heavy Grooving

TIGER

Precision and Utility Inserts for External Heavy Grooving on Tough Materials

GDMU/GDPU

Utility Inserts for External and Internal Grooving and Turning at Low-to-Medium Feeds

TGMF/P

Blank Inserts for Wide Profile Grooving

XNUW

Blank Inserts for Wide Profile Grooving

FTB

Full Radius, Precision Inserts for Machining Aluminum at Medium-to-High Feeds

FGPA

Inserts for Shallow Face Machining

GIP-D/G

Precision, Double-Ended Inserts for Internal Undercutting

GIPI-UR/UL

Precision, Double-Ended Inserts for Internal Undercutting

GEPI-UN/UR/UL

MINCUT Screw Clamped Inserts for Internal Face Grooving and Turning, Penetration Diameter Range: 8-17 mm

MIFR

Face Grooving and Recessing Pentagonal Inserts

PENTA 34F-R/L

Face Grooving Inserts

GFQR

Inserts for Deep Face Grooving and Turning

GIFG-E (W=8)

SELF-GRIP Face Grooving Inserts

GFF-N

Interchangeable, Left-Hand, Solid Carbide Reaming Heads with a Quick Change Bayonet Mechanism for High Speed Reaming

RM-BN-H7LB

Single-Edged Reaming Inserts, for High Surface Quality at Low Cutting Conditions

RM-SEI-A

Straight Flute, Shell Reamers with Brazed Carbide Tips, DIN 8054

RM-SR-H7S

Precision Ground, 55° Partial Profile, Double-Ended Internal Threading Inserts with a Chipformer

GEPI-WT

Precision Ground, 60° Partial Profile, Double-Ended, External Threading Inserts

TIP-MT

External 55°, Partial Profile, Laydown Threading Inserts, for General Industry

ER/L-55°

Internal Threading Inserts for Threading Whitworth, Partial Profile in 8 mm and Larger Holes

GIQR/L-WT

Mini Indexable Inserts, for Threading Whitworth, Partial Profile in 5.2 mm and Larger Holes

UMGR-A55

55° Partial-Profile, Internal Threading, Double-Ended Inserts with a Chipformer, for 20 mm min. Bore Diameters

TIPI-WT

External UN (UN, UNC,UNF,UNEF, UNS) Full Profile Thread Milling Inserts, for General Industry

MT-UN (External)

External & Internal NPT Helical Thread Milling Inserts, for Steam, Gas and Water Pipes

MTH-NPT(Internal & External)

Thread Milling Insert for American (UN, UNC, UNF, UNEF, UNS) Full Profile Threads. Application, General Industry

MT-UN (Internal)

Helical Thread Milling Insert for American Full Profile Threads. Application, General Industry

MTH-UN(Internal)

General Use, Square Inserts for Milling, Drilling and Boring with 2 Right-Hand and 2 Left-Hand Cutting Edges

XOMT-HQ

Drilling Heads for DCM Drills, for Cast Iron

IDI-SK

Exchangeable Drilling Bits for DCN Drills, for Carbon and Alloy Steel (ISO P Materials)

ICP

Exchangeable Drilling Bits with Coolant Holes, for Stainless Steel and High Temperature Alloys (ISO M)

IDM

Inserts for DR Drills with DT Chipformer, for General Applications at Medium-to-High Feeds

AOMT-DT

Inserts for DR Drills and A-SXFOR/L Boring Bars, for Ductile Materials

XOMT-GF

Inserts for DZ Drills with Serrated Cutting Edges for Chip Splitting, for Medium-to-High Feeds

WOLH-SW

Inserts for DSD-EC / DDD-EC / DSD-IC Drilling Heads

NPMX 0802 RG

Octagonal Double-Sided Wiper Insert with 8 Cutting Edges

ONHU 0505-W

HELIDO square, thick inserts with 8 helical right-hand cutting edges, providing a very economical 45° milling solution.

S845 SXMU/SXCU-16

HELIOCTO octagonal milling inserts for heavy duty applications.

OFMW-AETN

16MILL, octagonal milling inserts. Used for machining steel.

ONMU/ONHU-08-TN-MM

Square screw-clamped insert, for medium machining.

SEKT-AFTN

A tangentially clamped, wiper insert. Designed for 45° lead angle in F45LN cutters.

LNAT 1506AN-W

CHAMMILL square shoulder milling inserts. Part of the CHAMELEON multi-functional line.

S90MT

HELIMILL general use milling inserts. The -RM insert have a reinforced cutting edge for heavy machining applications.

ADKT 1505ADR-HM/RM

Milling inserts for very high feed machining up to 3.5 mm/tooth at small depth of cut.

FF WOMW

Flat rake face, general use milling inserts.

SEKN-AF..

HELIMILL inserts with a ground cutting edge, used for finishing and high accuracy.

APCT 1003PDR-HM

HELI2000, milling inserts. Used on hardened steel and for unfavorable conditions and heavy interrupted cut.

HM90 ADKW 1505PDR

Square positive insert with chip splitting serrated cutting edges. Improves stability and enables milling at high DOC.

SPKR EDTR-HS

MILL2000 Inserts for heavy milling applications with a variety of corner radii.

3M AXKT 1304..R-PDRMM

MILL2000 inserts for heavy milling applications.

3M AXKT-2006

HELIDO double-sided rectangular inserts with 2 helical cutting edges for fast feed.

H490 ANKX/ANCX 1706-FF

A tangentially clamped insert, with 4, straight, right-hand cutting edges. Belongs to the HELITANG family.

LNHT 1106 PN-R HT

Tangentially clamped inserts with a positive land. Can be used on steel, stainless steel and cast iron.

LNKX 1506PN-N PL

HELIMILL super positive inserts with polished rake for machining aluminum and high temp alloys.

HM90 APCR 100304PDFR-P/DP

HELI2000 milling insert, peripherally ground with a super positive polished rake. Used for machining aluminum and HTA.

HM90 ADCR 1505PDFR-P

Square positive inserts, may be used for right or left-hand tools for general use.

SPMT-HQ

General use square inserts with helical cutting edges, used for 90° shoulders.

SDMT-PDR-HQ

HELIPLUS 7 mm insert with a strong, flat rake for rough machining and for hardened steel.

HP ANKW 070204PNTR

HELIPLUS 19 mm cutting edge milling inserts for general use.

HP ADKT/ADCT 1906

HELIPLUS milling inserts with a very positive and polished rake used for machining aluminum and HTA.

HP ADCR 2207

Triangular positive inserts with a flat rake, used for short chipping materials.

TPUN

Chip Splitting Inserts for Rough Milling of Aluminum

HM90 APCR 220605-CS

HELIALU super positive inserts with a polished rake for machining aluminum.

APCR 2206..-HM

Square, 7° Positive, Flat Rake Inserts, for Semi-Roughing Applications at Medium to High Feeds

SCMT-17,19

Round Flat Rake Milling Inserts

RCMW/RCCW-MO

Toroidal bull nose, peripherally ground inserts with 4 cutting edges.

ENHT

220° Spherical Cutting Profile Inserts. Used for Profiling, Up and Down Ramping, Steep Profiles and Undercutting

HBF-QF

Precision ground negative rake, round milling inserts with a star-shaped bottom for indexing and preventing rotation.

RXCW

Inserts for slotting (TANGSLOT). Used for deep and long steel slots.

LNET 12-TN-MM

Precision Inserts for Internal Turning and Grooving

GIPI-E

Slitting inserts (full radius).

GSFU

Double-Sided Insert with Four 80° Corners for General Applications

QNMG-TF

Positive 7° Clearance, Four 80° Cornered Insert with a Chipformer for Finishing

QCMT-SM

Double-Sided Trigon Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

WNMG-PP

80° Rhombic, Double-Sided Insert, for Semi-Finishing and Finishing Applications

CNMG-NF

80° Rhombic, 7° Positive Flank Inserts, Very Positive Rake and Sharp Cutting Edge, for Machining Aluminum

CCGT-AF

Single-Sided, Square Insert, for Roughing of Soft and Ductile Materials

SNMM-RP

Precision, Positive 8° and 12° Clearance, 80° and 84° Trigon Inserts with a Flat Rake for Finishing Applications

WPEB

55° Rhombic Insert with 7° Positive Clearance, for Finishing Applications

DCMT/DCGT

35° Rhombic, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

VCMT-14

Triangular, Double-Sided Inserts, for Finishing Applications on Alloyed and Stainless Steel

TNMG-PF

11° Positive Triangular Inserts. Positive Chipformer, Low Cutting Forces, for Internal Turning and Finishing

TPMR

Triangular 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

TCMT-14

Tangential Insert with a Positive Rake Angle, for High Metal Removal on Soft and Ductile Materials

LNMX-HM

55° Rhombic, Double-Sided Inserts, for Super-Finishing. Controls Chip Flow at Very Low Feed and Depth of Cut

DNMG/DNGG-SF

Single-Sided, 35° Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

VNMM-PP

35° Rhombic, Single-Sided Inserts, for Soft and Nonferrous Materials

VNMS-12

Round, 7° Positive Flank Inserts, for Medium and Finish Profiling on a Wide Range of Materials

RCMT-14

Round, 7° Positive Flank Inserts, with a Strong Cutting Edge, for Rough Turning

RCMX-NR

Pipe Skiving Inserts with a Positive Rake, Used to Remove the Burr of Welded Tubes

SNMX 150708R-..

Triangular 11° Positive Flank Inserts, for Short Chipping Materials

TPGB-XL

Triangular Inserts with 11° Clearance and CBN Single Top Corner Tip

TPGX (CBN)

Trigon, 5° Positive Flank Inserts with a Ground Chipformer for Finish Turning

WBGT

Internal Grooving and Turning, Round-Ended Inserts

GIQR/L-R

Back Turning Inserts for Short Chipping Materials

SCIR/L-B/F-ER/EL

Single-Ended Parting Insert, for Parting Bars, Hard Materials and Tough Applications

GFR/L-C

TANG-GRIP Parting Inserts for Soft Materials, Tubes, Small Diameters and Thin-Walled Parts

TAG R/L-J/JS

Double-Sided Parting Insert, for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts

DGR/L-J/JS

Parting Double-Sided Insert for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts

HGR/L-J/JS

Parting & Grooving Single-Ended Insert Without Stopper, Central Ridged Chipformer, for Steel and Stainless Steel

GTN-W

Parting and Grooving Single-Sided Screw Clamped Insert. Central Ridged Chipformer, for Alloyed and Stainless Steel

GIM-W

Utility Inserts for External Turning Grooving and Parting

GDMW 2.4

Grooving, Parting and Turning Inserts

SCIR/L-B-NP

Precision Inserts, for Internal and External Turning and Grooving at Low Feeds

GEPI

Parting Insert With 5 Cutting Edges, the Most Economical System Available

PENTA 24R/L-J

Utility Inserts, for External Grooving and Turning

GIMY 1260

Single-Ended, Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitter

GDMM-CC

Precision Inserts for Internal Grooving Next to Shoulder

GEPI-RX/LX

Utility, Full Radius Inserts for External and Internal Grooving and Turning Applications

TGMF (Full radius)

Full Radius, Utility Inserts for Machining Aluminum at Medium-to-High Feeds

FGMA

Inserts for Shallow Face Grooving and Turning, Dmin=30 mm

GIF-E-D/G

Utility, Double-Ended, Face Machining Insert

HGPL

SELF-GRIP Face Grooving Inserts

GFF-R/L

Interchangeable, Straight Flute, Solid Carbide Reaming Heads with Quick Change Bayonet Mechanism for High Speed Reaming

RM-BN-H7SA

Single-Edged Reaming Inserts, for General Applications at High Cutting Speeds

RM-SEI-B

Precision Ground, American UN (UNC,UNF,UNEF), Full Profile, Double-Ended, External Threading Inserts with a Chipformer

TIP-P-UN

External ISO metric (DIN13 12-1986 class :6G), Laydown Threading Inserts, for General Industry

ER/L-ISO

Precision Ground, 60° Partial Profile, Double-Ended, Internal Threading Inserts with a Chipformer, 20 mm Min. Bore Dia.

TIPI-MT

Internal 55°, Partial Profile, Laydown Threading Inserts, for General Industry

IR/L-55

External & Internal Whitworth (BSW, BSF, BSP) Full Profile Thread Milling Inserts, for Fittings and Pipe Couplings

MT-W

Helical External & Internal Thread Milling Insert for BSPT, for Steam, Gas and Water Pipes

MTH-BSPT(Internal& External)

Exchangeable Drilling Bits for DCN Drills, for Cast Iron (ISO K Materials)

ICK

Exchangeable Drilling Bits with Coolant Holes, for Cast Iron (ISO K)

IDK

Inserts for DR Drills, for Soft Materials at Low-to-Medium Feeds

SOMT-GF

Inserts for DSD-EC / DDD-EC / DSD-IC Drilling Heads

TPMX-LG;RG/RB

Square Double-Sided Inserts with 8 Cutting Edges

S845 SNMU/SNHU-13

Milling inserts used on HELIOCTO cutters, for very high feed machining up to 3.0 mm/tooth at low depths of cut.

OFMW-FF

16MILL, octagonal milling inserts with sharp and positive land. Eliminates chipping on cast iron sharp edged components.

ONHU 0806-N-PL

HELIOCTO octagonal milling inserts.

OEMT/OEKT 060405

Square milling inserts with chip splitting serrated cutting edge, used for 45° roughing applications.

SEMT 1204AF-R-HS

A tangentially clamped insert with a negative land, reinforced chipformer for unfavorable cutting conditions.

LNKX/LNMT 150608ANTN MM

CHAMMILL round profile milling inserts. Part of the CHAMELEON multi-functional line.

R90MT

Milling inserts for very high feed machining up to 3.5 mm/tooth at low depth of cut.

FF WOMT-CS

Super positive, square milling inserts used for 45° finishing and medium machining on soft materials.

SEKR-AF-N-42

HELIMILL 11 mm long, super positive inserts for aluminum, stainless steel and high temperature alloys.

APKR 1003PDR-HM

HELIMILL super positive inserts, used for machining aluminum, stainless steel and high temperature alloys.

ADKR 1505PD-R/L-HM

Special chipbreaker for lower power consumption, longer tool life, reduces heat transfer.

SPKR ED..-76

MILL2000 Inserts for heavy milling applications with a variety of corner radii.

3M AXKT 2006..R-PDR

Tangential insert. Positive land.

LNAR 1106

Tangentially Clamped Insert, Reinforced Negative Land, Used for Unfavorable Conditions

LNKX/LNMT 1506PNTN/PN-N MM

HELI2000 wiper insert, used for high surface finish. Use only one insert on the milling cutter.

HM90 ADKT 1505PD-W

Super positive square milling inserts, used for machining aluminum, stainless steel and high temperature alloys.

QPMR 1004..

A general use insert with four helical cutting edges, used for 90° shoulder milling applications.

SDMT-PDN-RM

General use, 7 mm inserts with various corner radii.

HP ANKT/ANCT 0702..PN-R/PNTR

Square, General Use Milling Inserts

SOMT-HQ

Super positive inserts for aluminum, stainless steel and high temperature alloys.

APKR 2206..-HM

Square, 7° positive flank, flat rake inserts, used for short chipping materials.

SCMW

Round, Positive Rake Milling Inserts

RCMT/RCCT-MO

2 Cutting Edges (Fully Effective) Ball Nose Insert with an Extended Flute, Used for Cavity Profiling and Shouldering

HCR

Precision ground positive rake, round milling inserts with a star-shaped bottom for indexing and preventing rotation.

RXCR

TANGSLOT tangentially mounted, 4 cornered inserts used for parting and slitting.

LNET 12..-30X1-N

Precision Inserts, Full Radius for Internal Grooving and Recessing

GIPI (Full Radius)

SELF-GRIP slitting inserts for specially tailored heavy-duty slitting cutters.

GSHT

Double-Sided Insert with Four 80° Corners for General Applications

QNMG-PP

Trigon, Double-Sided Inserts with a Ground Chipformer for Finishing Applications

WNMZ-RF/LF

Double-Sided, 80° Rhombic Insert for Machining Wide Range of Materials at Medium Cutting Conditions

CNMG/CNGG-TF

80° Rhombic, Single-Sided Inserts, for Soft and Nonferrous Materials

CNMS-12

80° Rhombic, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning

CCMT-14,16

Double-Sided, Square Insert for Machining a Wide Range of Materials at Medium Cutting Conditions

SNMG-TF

Square, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

SCMT-14

55° Rhombic Insert with 7° Positive Clearance, for Finishing Applications

DCGT-38

35° Rhombic, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

VCMT-SM

Triangular, Double-Sided Inserts, for Semi-Finishing & Finishing Applications

TNMG-NF

Triangular, 11° Positive Flank, Ceramic Precision Ground Inserts, for Short Chipping Materials

TPGN-Ceramic

Triangular 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

TCMT-SM

Silicon Nitride, Tangentially Clamped Insert with 4 Cutting Edges, for Machining Cast Iron at High Cutting Speeds

LNMX-T-R/L

55° Rhombic, Single-Sided Inserts, for Soft and Nonferrous Materials

DNMS-12

35° Rhombic, Double-Sided Inserts for Super-Finishing. Controls Chip Flow at Very Low Feed and Depth of Cut

VNMG-SF

Double-Sided, 35° Rhombic Insert for Machining a Wide Range of Materials at Medium Cutting Conditions

VNMG-TF

Round, 7° Positive Flank Inserts, for Medium Profiling on a Wide Range of Materials

RCMT-SR

80° Rhombic, Positive Flank Inserts, for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys

CCMT-PF

Triangular 11° Positive Flank Inserts with a Ground Chipformer for Finish Turning

TPGH-XL

Triangular Inserts with 11° Clearance, PCD Single Top Corner Tip and Positive Rake Angle, for Finishing Aluminum

TPGX (PCD)

55° Rhombic, Positive Flank Inserts, for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys

DCMT-PF

Internal Grooving and Turning Inserts for Dmin 11 mm

GIQR/L 11

Parting & Grooving Single-Ended Insert for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts

GFN-J

Parting & Grooving Single-Ended Insert for Parting Bars, Hard Materials and Tough Applications

TAG N-C

Double-Sided Insert for Parting of Tubes, Thin-Walled and Small Parts

DGN-Z

Parting & Grooving Double-Sided Insert, for Low Feeds on Cr-Ni Alloys and Low Carbon Steel

HGN-UT

Parting & Grooving Single-Ended Insert, Without a Stopper, for Parting Bars, Hard Materials and Tough Applications

GTN-C

Parting and Grooving Single-Sided Screw Clamped Insert, for Parting Bars, Hard Materials and Tough Applications

GIM-C

Precision Inserts for Internal and External Turning and Grooving at Low Feeds

GEPI (W<M)

Parting and Precision Grooving Pentagonal Insert with a High Positive Rake

PENTA 24N-Z

Utility, Single-Ended Inserts for Grooving and Turning Ductile Materials at Low-to-Medium Feeds

GIMN

Utility Inserts for Heavy Duty Turning and Grooving of Ductile Materials at Low-to-Medium Feeds

GDMN

Inserts for Shallow Face Grooving, Dmin 22 mm

GIP-E-D/G

Utility, Double-Ended, Face Machining Inserts

HFPR/L

Single-Edged Reaming Inserts, for Aluminum and Brass

RM-SEI-C

Precision Ground, 55° Partial Profile, Double-Ended, External Threading Inserts with a Chipformer

TIP-WT

External American UN Full Profile (UN, UNC, UNF, UNEF), Laydown Threading Inserts, for General Industry

ER/L-UN

External & Internal NPT Full Profile Thread Milling Inserts, for Steam, Gas and Water Pipes

MT-NPT

Exchangeable Drilling Bits with Coolant Holes, for Aluminum (ISO N)

IDN

Inserts for DR 05/06/07 Drill Sizes with GF Chipformer for Soft Materials

SOMX-GF

Double-Sided Wiper Insert with 8 Cutting Edges

S845 SNHU 1305-W

HELIOCTO positive octagonal milling inserts.

OFCR/OFCT-AEN/AETN

16MILL octagonal wiper insert.

ONHU 0806AN-*-W

HELIOCTO octagonal milling inserts.

OECR

Flat rake, square milling inserts used for 45° general use applications.

SEMW 1204AFTN

A tangentially clamped insert with a reinforced negative land. Used for unfavorable cutting conditions.

LNMW 150608 ANTN

CHAMMILL indexable milling inserts having 4 cutting edges for 45° facing.

S45MT

Square milling inserts with ribs along edge - reducing heat transfer, used for 45° roughing applications.

SEKR-AF..-76

HELIMILL inserts with ground large corner radii.

APKT 1003..R

HELIMILL general use inserts with diferrent corner radii.

ADKT 1505**R/L-HM

TANGMILL tangentially clamped milling inserts with a brazed PCD tip, used for machining aluminum.

LNAR 1106 (PCD)

Tangentially clamped chamfered inserts used on 90° cutters to eliminate chipping on the material edge during exiting.

LNKX 1506 1.5X45 PN-N

HELIQUAD general use square inserts with 2 right-hand and 2 left-hand cutting edges.

XPMT-HQ

QUAD2000 general use insert, has 4 right-hand or 4 left-hand cutting edges.

QDMT 1205..PDTN-M

Round milling inserts with a mounting bottom cylinder and 8 indexing cavities on the insert's flank.

RCCW/RCMW-H-T

Precision Inserts for Internal Grooving and Recessing

GIPI (W<M)

Double-Sided Insert with Four 80° Corners for General Applications

QNMG-GN

Double-Sided Trigon Insert with Sharp and Positive Radial Cutting Edges for Semi-Finishing and Finishing

WNGG-NF

80° Rhombic, Double-Sided, Wiper Inserts, Feature High Surface Finish at High Feed Turning

CNMG-WG

80° Rhombic, 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum

CCGT-AS

Square, Double-Sided Inserts, for Super-Finishing. Controls Chip Flow at Very Low Feed and Depth of Cut

SNMG-NF

Square, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

SCMT-SM

Very Positive Rake Angle and Sharp Cutting Edge Inserts, for Semi-Finishing and Finishing on Aluminum

DCGT-AF

35° Rhombic, 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum

VCGT-AS

Triangular, Single-Sided Inserts, for Soft and Nonferrous Materials

TNMS-12

Triangular, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

TCMT-GF

Double-Sided, 55° Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

DNMG/DNGG-PP

35° Rhombic, Double-Sided, Ceramic Inserts with a T-Land, for Machining Cast Iron and Hardened Steel

VNGA

Triangular 11° Positive Flank Inserts with a Ground Chipformer for Finish Turning

TPGH-R/L

CHAMGROOVE Internal Boring & Profiling Inserts for Dmin 8 mm

GIQR/L-A18

Internal Grooving and Turning Inserts for Dmin 15mm

GIQR/L 11-15

Single-Ended Parting Insert, for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts

GFR/L-J

Parting, Single-Ended Insert for Bars, Hard Materials and Tough Parting Applications

TAG R/L-C

Double-Sided Parting Insert, Very Positive Rake for Parting of Tubes, Thin-Walled and Small Parts

DGR/L-Z/ZS

Parting and Gooving Double-Sided Insert, C-Type Chipformer for Steel

HGN-C

Parting and Grooving, Single-Ended Inserts Without a Stopper, for Parting Aluminum Bars

GTN-A

Utility, Single-Sided Parting and Grooving Insert, for Soft Materials, Parting of Tubes and Small Diameters

GIM-J

Parting & Grooving Pentagonal Insert, for Parting Bars, Hard Materials and Tough Applications

PENTA 34N/R/L-C

Utility Inserts, for Heavy-Duty Turning and Grooving. Positive Chipformer for Medium-to-High Feeds

GDMY

Parting and Precision Grooving Pentagonal Full Radius Insert for Soft Materials

PENTA 24N-J (Full Radius)

Precision Inserts, Full Radius for Internal and External Turning and Grooving at Low Feeds

GEPI (Full Radius)

Precision Inserts for External Undercutting and Recessing

GIP-UN

Utility Inserts, for Internal Turning and Grooving

GIMIY

Precision Inserts for Internal Grooving Next to Shoulder

GIPI-RX/LX

Utility, Double-Ended, Full Radius, Face Machining Inserts

HFPR/L (full radius)

Precision Ground, American BSW, BSF, BSP, Full Profile, Double-Ended, External Threading Inserts with a Chipformer

TIP-P-BSW

External Whitworth (BSW, BSF, BSP), B.S.84-1956 DIN 259 Medium Class, Full Profile Laydown Threading Inserts

ER/L-W

Internal ISO Metric (DIN13 12-1986 class 6H), Laydown Threading Inserts, for General Industry

IR/L-ISO

External & Internal NPTF Full Profile Thread Milling Inserts, for Steam, Gas and Water Pipes

MT-NPTF

Inserts for DR 05/06/07 Drill Sizes with DT General use Chipformer

SOMX-DT

HELIOCTO wiper milling inserts with four (4) cutting edges.

OFCT/OFCR-RW/AER (Wiper)

16MILL octagonal, double-sided face milling insert used on High Temp. Alloys, Stainless steel and steels.

ONMU/ONHU 080608 AN-N-HP

HELIOCTO octagonal milling inserts.

OEMW-AETN

Milling inserts with ribs along edge - reducing heat transfer. Used for heavy machining.

SEMT 12**AFTN-76

Tangentially clamped insert with molded chipformer, reinforced negative land for unfavorable cutting conditions.

LNHW 1506 ANTN (Ceramic)

Square milling inserts with chip splitting serrated cutting edge, used for 45° roughing applications.

SEKR-AFTR-HS

HELIMILL inserts with different corner radii and a reinforced cutting edge for interrupted cut and heavy machining.

APKT 1003..##TR-RM

HELIMILL general use milling inserts.

ADKT 1505PDR/L-HM

A tangentially clamped insert, with straight, right-hand and left-hand cutting edges. Belongs to the HELITANG family.

LNHT 1106 PN-N HT

Tangentially clamped insert. Positive land, sharp cutting edge. The -P suffix stands for polished.

LNAR 1506

A tangentially clamped - HELITANG insert with 2 straight, cutting edges - FOR DEEP SLOTTING.

LNHT 1506PN-N-HT-S

Precision Inserts, Full Radius for Internal Grooving and Recessing

GIPI (Full Radius)(W<M)

Trigon, Double-Sided Inserts, for Super-Finishing. Controls Chip Flow at Very Low Feed and Depth of Cut

WNMG-SF

80° Rhombic, Double-Sided, Wiper Inserts, for Finishing Operations at High Feeds

CNMG-WF

Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys

CCMT/CCGT-SM

Double-Sided, Square Insert with a Chipformer, for High Temperature Alloys and Stainless Steel Valves

SNMG-VL

55° Rhombic, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

DCMT-14

35° Rhombic, Double-Sided, Wiper Inserts, for Finishing Operations at High Feeds

VCET-WF

Double-Sided, Triangular Insert for Machining Wide Range of Materials at Medium Cutting Conditions

TNMG-TF

Triangular 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum

TCGT-AS

55° Rhombic, Double-Sided Inserts, for Finishing Applications on Alloyed and Stainless Steel

DNMG-PF

Internal Grooving and Turning Round-Ended Inserts, for Dmin 15mm

GIQR/L 11-15-R

Parting & Grooving Single-Ended Insert, Central Ridged Chipformer for Steel

GFN-W

Parting & Grooving Single-Ended Insert. Central Ridged Chipformer, for Hard Materials and Tough Applications

TAG N-W

Parting & Grooving Double-Sided Insert. Central Ridged Chipformer used on Steel and Stainless Steel

DGN-W

Double-Ended Parting and Grooving Inserts, with Internal Coolant Holes

HGR/L-C

Single-ended, Parting and Grooving, Screw Clamped Inserts, for Low Feeds, on CrNi alloys and Low Carbon Steel

GIM-UT

Parting and Precision Grooving Pentagonal Insert with a High Positive Rake

PENTA 24N-PF

Utility Inserts, for Grooving and Turning

GIMY

Precision Inserts for External Heavy-Duty Machining

GDPY

Utility Inserts for External Undercutting

GIMY-UN

Precision Ground, NPT (National Pipe Threads) Full Profile, Double-Ended, External Threading Inserts with a Chipformer

TIP-P-NPT

External BSPT (British Standard Pipe) B.S.21-1957, Full Profile, Laydown, Threading Inserts

ER/L-BSPT

Internal American UN, Full Profile (UN, UNC, UNF, UNEF), Laydown Threading Inserts, for General Industry

IR/L-UN

External & Internal Thread Milling Insert for BSPT Full Profile

MT-BSPT

Round inserts with a reinforced flat rake for profile milling.

RFMW 1905

16MILL octagonal, double-sided ceramic face milling insert.

ONHQ-TN

Round milling inserts with ribs on the rake face. Used on the HELIOCTO tools.

REMT-76

Ground, sharp cutting edge, general use milling inserts.

SEHW-AFTN

Square milling inserts with different corner radii, used for heavy machining.

SEMN

HELIMILL general use milling inserts.

APKT 1003PDR-HM

HELIMILL inserts with ribs along edge, reducing heat. May be used for interrupted cuts.

ADKT 1505PDTR-76

A tangentially clamped, wiper insert.

LNAT 1106-W

Tangentially clamped, precision ground inserts with various corner radii, used for corner rounding.

LNAT 1506..PN-N MM

Precision Inserts for Internal Grooving and Recessing

GIFI

Double-Sided, Trigon Insert for Machining a Wide Range of Materials at Medium Cutting Conditions

WNMG-TF

Double-Sided, 80° Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

CNMG/CNGG-PP

80° Rhombic Insert with a 7° Positive Flank and a Wiper Near the Corner, for High Feed Finishing

CCMT-WG

Double-Sided, Square Insert for General Applications

SNMG-GN

55° Rhombic, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys

DCMT/DCGT-SM

35° Rhombic, 7° Positive Flank Inserts, for Short Chipping Materials such as Cast Iron

VCMW

Double-Sided, Triangular Insert with a Chipformer, for High Temperature Alloys and Stainless Steel Valves

TNMG-VL

Triangular 7° Positive Flank Inserts, for Short Chipping Materials

TCMW

55° Rhombic, Double-Sided Insert, for Semi-Finishing and Finishing Applications

DNMG-NF

Single-Ended Parting Insert, Central Ridged Chipformer, for Steel and Stainless Steel

GFR/L-W

Parting & Grooving Single-Ended Insert, for Parting Bars, Hard Materials and Tough Applications

TAG N-UT

Double-Sided Parting Insert, Wiper Design for High Flatness and Surface Finish

DGR-WP

Utility, Single-Sided Parting and Grooving Insert, for Soft Materials, Parting of Tubes and Small Diameters.

GIM-J-RA/LA

Full Radius, Precision, Sharp Edged Inserts for Profiling of High Temperature Alloys

GIPY

Utility Inserts, for Grooving and Turning of Ductile Materials

GDMY-F

Precision Ground, BSPT (British standard pipe) Full Profile, Double-Ended, External Threading Inserts with a Chipformer

TIP-P-BSPT

External DIN 405, Round, Laydown, Threading Inserts, for Fire Fighting and Food Industry Pipe Couplings

ER/L-RND

Internal Whitworth (BSW, BSF, BSP), B.S.84-1956 DIN 259 Medium Class, Full Profile Laydown Threading Inserts

IR/L-W

External & Internal PG Full Profile Thread Milling Inserts, for Electrical Connectors

MT-PG

Round milling inserts.

RFMT 1905-76

Round inserts with a reinforced flat rake for profile milling.

REMW

Precision ground, sharp cutting edges, general use milling inserts used on 45° milling cutters.

SEHT-AFN

HELIMILL inserts with ribs along edge, reducing heat. May be used for interrupted cuts.

APKT 1003PDTR-76

HELIMILL insert with reinforced helical cutting edge for interrupted cut and heavy machining.

ADKT 1505PDTR/L-RM

Tangentially clamped, wiper milling inserts with a brazed PCD tip, used for machining aluminum

LNAR 1106PN-R-S-W (PCD)

TANGMILL tangentially clamped milling inserts with a brazed PCD tip, used for machining aluminum.

LNAR 1506 (PCD)

HELIMILL super positive precision inserts, used for aluminum, stainless steel and high temperature alloys.

ADCR 1505PDFR

Precision Inserts for Internal Turning and Grooving

GIFI-E

Double-Sided, Trigon Insert with a Chipformer, for High Temperature Alloys and Stainless Steel Valves

WNMG-VL

80° Rhombic, Double-Sided Inserts with a Ground Chipformer for Finishing Applications

CNMZ

80° Rhombic Insert with a 7° Positive Flank and a Wiper Near the Corner, for High-Feed Finishing

CCET-WF

Single-Sided, Square Inserts for Roughing Applications

SNMM-NM

55° Rhombic, 7° Positive Flank Inserts, for Short Chipping Materials

DCMW

Inserts with 7° Clearance, PCD, Single Top Corner Tip and a Positive Rake Angle, for Finishing Aluminum

VCGT (PCD)

Double-Sided, Triangular Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

TNMG/TNGG-PP

CBN Inserts with a Flat Rake, for Short Chipping Materials such as Cast Iron and Hardened Steel

TCMT (CBN)

Double-Sided 55° Rhombic Insert with a Chipformer for High Temperature Alloys and Stainless Steel Valves

DNMG-VL

Square, Double-Sided Inserts, for Medium Machining of High Temperature Alloys

SNMG-EM-M

Parting & Grooving Single-Ended Insert, for Parting Nonferrous Bars

GFN-M

Parting and Grooving Single-Ended Insert for Machining Aluminum

TAG N-A

Parting and Grooving, Double-Sided Insert. Wiper Design for High Flatness and Surface Finish

DGN-WP

Parting, Single-Sided, Screw Clamped Insert. Central Ridged Chipformer. Used on Alloyed and Stainless Steel.

GIM-W-RA/LA

Utility Inserts, for Grooving and Turning

GIMY (Full Radius)

Full Radius, Utility Inserts for Heavy Duty Turning and Grooving

GDMY (Full Radius)

External Sagengenwinde Thread, Application for High Force in One Direction

ER/L-SAGE

HELIMILL insert with reinforced helical cutting edge for interrupted cut and heavy machining.

APKT 1003PDTR/L-RM

HELIMILL insert with reinforced helical cutting edge for interrupted cut and heavy machining.

ADKT 1505PDTR-8M

A tangentially clamped, wiper insert.

LNAT 1506-W

Precision Inserts, Full Radius for Internal Turning and Grooving

GIFI-E (Full Radius)

Double-Sided, Trigon Insert, for Semi-Roughing and Roughing Applications

WNMG-TNM

Very Positive Radial Insert, Helical Cutting Edge and Positive Rake, for Heavy Machining Applications

CNMM-HTW

80° Rhombic Inserts with 7° Clearance and CBN Single Top Corner Tip

CCMT (CBN)

Double-Sided, Square Inserts with a Special Chipformer for Heavy Machining

SNMG-NR

55° Rhombic Inserts with 7° Clearance and CBN Single Top Corner Tip

DCMT (CBN)

Triangular, Double-Sided Inserts with a Ground Chipformer for Finishing Applications

TNMZ-RF/LF

55° Rhombic, Double-Sided, Wiper Inserts, Feature High Surface Finish at High Feed Turning

DNMG-WG

55° Rhombic, Double-Sided, Wiper Inserts, for Finishing Operations at High Feeds

DCET-WF

Square, Double-Sided Inserts, for Rough Machining of High Temperature Alloys

SNMG-EM-R

Parting & Grooving Single-Ended Insert, for Low Feeds on Cr-Ni Alloys and Low Carbon Steel

GFN-U

Parting & Grooving Insert, for Parting Bars, Hard Materials and Tough Applications

DGN-C/DGNC-C/DGNM-C

Single-ended, Parting, Screw Clamped Inserts. Used at low feeds on CrNi alloys and Low Carbon Steel

GIM-UT-RA/LA

Precision Inserts for Grooving at Low to-Medium Feeds

GIF

Precision Inserts for External Heavy Duty Machining

GIF-E (W=8,10)

External ACME profile, Laydown Threading Inserts, for Feed Screws

ER/L-ACME

Internal BSPT (British Standard Pipe) B.S.21-1957, Full Profile, Laydown, Threading Inserts

IR/L-BSPT

HELIMILL insert with reinforced helical cutting edge for interrupted cut and heavy machining.

APKT 1003PDTR-8M

HELIMILL inserts with a serrated cutting edge for chip splitting, used for roughing applications.

ADMT 1505PDR/L-HS

Tangentially Clamped Insert, Designed for Machining Grey and Nodular Cast Iron

LNMW 1506 PNTN

Wiper HELIMILL insert for improved surface finish.

ADKT 1505PD-W

QUAD2000 general use insert, has 4 right-hand or 4 left-hand cutting edges.

QDMT 1205PDN-RM

Trigon, Double-Sided, Wiper Inserts, Feature High Surface Finish at High Feed Turning

WNMG-WG

Double-Sided, 80° Rhombic Insert for General Applications

CNMG-GN

Double-Sided, 80°, Rhombic Insert with High Helical Cutting Edge for High Metal Removal Rates

CNMX-HTW

Single-Sided, Square Inserts with a Special Chipformer for Heavy Machining

SNMM-NR

Double-Sided, Triangular Insert for General Applications

TNMG-GN

Double-Sided, 55° Rhombic Insert for General Applications

DNMG-GN

Parting, Single-Ended Insert, for Low Feeds on Cr-Ni Alloys and Low Carbon Steel

GFR-U

Double-Sided Parting Insert, for Parting Bars, Hard Materials and Tough Applications

DGR/L-C,DGRC/LC-C

Precision Inserts for Ext/Int Turning and Grooving at Low to-Medium Feeds

GIF-E (W=4-6)

Utility Inserts for General Heavy-Duty Turning and Grooving at Medium-to-High Feeds

GDMF

External STUB ACME, Laydown Threading Inserts, for Control Valves and Shallow ACME Profile

ER/L-STACME

Internal DIN 405, Round, Laydown, Threading Inserts, for Fire Fighting and Food Industry Pipe Couplings

IR/L-RND

HELIMILL super positive inserts with a polished rake for machining aluminum.

APCR 1003PDFR-P

HELIMILL peripherally ground inserts, used for finishing and general use.

ADCT 1505PDFR-HM

A tangentially clamped insert, with 4 straight, right-hand cutting edges. Belongs to the TANGMILL family.

LNMT/LNHT 1506PN-R HT

A single R.H. PCD tipped milling insert, used for machining aluminum with excellent surface finish results.

ADKW (PCD)

Trigon, Double-Sided, Wiper Inserts, for Finishing Operations at High Feeds

WNMG-WF

80° Rhombic Double-Sided Inserts, for Short Chipping Materials e.g. Cast Iron

CNMA

Single-Sided, Square Insert with a Strong Cutting Edge, for Extra Rough Turning

SNMM-HR

Triangular, Double-Sided Insert without Chipformer for Short Chipping Materials, i.e. Cast Iron

TNMA

Double-Sided, 55° Rhombic Insert with High Helical Cutting Edge for High Metal Removal Rates

DNMX-HT

Parting & Grooving Single-Ended Insert, for Parting Aluminum

GFN-A

Parting & Grooving, Double-Sided Insert, for Soft Materials, Slim Parts and General Parting

DGN-P

Inserts for External, Internal and Face Machining

GRIP

Precision Inserts, Full Radius for Turning and Grooving at Low to-Medium Feeds

GIF-E (W=4-6) (Full Radius)

Precision Inserts for External, Internal and Face Grooving at Low to-Medium Feeds

GIF (W=8)

External American Buttress Laydown Threading Inserts, for High Force Transmission in One Direction

ER/L-ABUT

Internal Trapeze Shaped, DIN 103, Laydown Threading Inserts, for Feed Screws

IR/L-TR

face of the cutter.th standard wide range of corner radii.

HM90 APKT 1003

A tangentially clamped insert, with 4 straight cutting edges 2 L.H. and 2 R.H. Belongs to the HELITANG family.

LNMT/LNHT 1506PN-N HT

Inserts for Very High Feed Milling

ADKT 1505-FF

HELIQUAD precision-ground, general use inserts with 4 right-or-hand cutting edges.

QDCT-PDN

Double-Sided, Trigon Insert for General Applications

WNMG-GN

80° Rhombic Inserts with CBN Single Top Corner Tip

CNMA (CBN)

Square, Double-Sided Insert without Chipformer, for Short Chipping Materials

SNMA

Triangular, CBN Inserts, for Short Chipping Materials such as Cast Iron and Hardened Steel

TNMA (CBN)

Single-Sided, 55° Rhombic Inserts for Roughing Applications

DNMM-NM

Double-Sided Parting Insert, for Soft Materials, Slim Parts and General Parting

DGR/L-P

Precision Inserts for Turning and Grooving

GIP-E

Utility Inserts, for Grooving and Turning of Ductile Materials

GIMY-F

Precision Inserts, Full Radius for External Heavy Duty Machining

GIF-E (W=8,10)(Full Radius)

External UNJ Profile, Laydown Threading Inserts, for Aviation and Aerospace Industry

ER/L-UNJ

Internal Sagengenwinde (DIN 513 04-1985) Thread, Application for High Force in One Direction

IR/L-SAGE

TANGSHRED-A tangentially clamped insert with a serrated cutting edge for chip splitting.

LNMT 1506PN-R-TS

A single R.H. with an IB85 PCBN brazed tip. Used for machining hard materials

ADKW (CBN)

Trigon, Single-Sided Inserts for Roughing Applications

WNMM-NM

80° Rhombic Double-Sided, with T-Land, for Cast Iron and Hardened Steel

CNGA-Ceramic

CBN Inserts with a Flat Rake, for Short Chipping Materials such as Cast Iron and Hardened Steel

SNMA (CBN)

Triangular, Double-Sided, Ceramic Inserts, for Machining Cast Iron and Hardened Steel

TNGA-Ceramic

Double-Sided, 55° Rhombic Inserts with a Special Chipformer for Heavy Machining

DNMG-NR

Parting and Grooving, Double-Sided Insert, for Low Feeds on Cr-Ni Alloys and Low Carbon Steel

DGN-UT/UA

Precision Inserts, Full Radius for Turning and Grooving

GIP-E (Full Radius)

Precision Inserts, Full Radius for Grooving at Low to-Medium Feeds

GIF (Full Radius)

External MJ ISO 5855 Metric, Full Profile, Laydown Threading Inserts, for the Aviation and Aerospace Industry

ER-MJ

Internal ACME Profile, Laydown Threading Inserts, for Feed Screws

IR/L-ACME

TANGMILL tangentially clamped ceramic insert. Used for high speed machining of grey and nodular cast iron.

LNHW 1506 PNTN (Ceramic)

HELI2000 inserts with reinforced edge and flat rake, used for hardened steel and milling at heavy interrupted cut.

HM90 APKW 1003PDR

HELIMILL flat rake, general use milling insert.

ADMA 150308

Double-Sided, Trigon Inserts with a Special Chipformer for Heavy Machining

WNMG-NR

Double-Sided, 80° Rhombic Inserts with a Special Chipformer for Heavy Machining

CNMG-NR

Square, Double-Sided Ceramic Inserts, without Chipformers, for Short Chipping Materials

SNGA-Ceramic

Single-Sided, Triangular Inserts with a Special Chipformer for Heavy Machining

TNMM-NR

55° Rhombic Double-Sided Inserts, for Short Chipping Materials. e.g. Cast Iron

DNMA

Full Radius Inserts for External, Internal and Face Machining

GRIP (Full Radius)

Precision Inserts for External, Internal and Face Grooving of Cast Iron

GIA-K (W=8)

V-Shaped Inserts, 8.0 mm Width for Machining Aluminum and High Temperature Alloys

GIPA 8-35V (\"V\" Shape)

External NPT (National Pipe Threads) Full Profile Laydown Threading Inserts, for Steam, Gas and Water Pipes

ER/L-NPT

Internal STUB ACME, Laydown Threading Inserts, for Control Valves and Shallow ACME Profile

IR/L-STACME

A single R.H. PCD tipped milling insert, used for machining aluminum with excellent surface finish results.

APKW 100304 PDR (PCD)

HELIMILL general use milling insert.

ADMM 150308-88

Double-Sided Trigon Inserts, for Short Chipping Materials such as Cast Iron

WNMA/WNMA-WG

Single-Sided, 80° Rhombic Inserts for Roughing Applications

CNMM-NM

Single-Sided, Triangular Insert, for Roughing of Soft and Ductile Materials

TNMM-RP

CBN Inserts with a Flat Rake, for Short Chipping Materials such as Cast Iron and Hardened Steel

DNMA (CBN)

CBN Inserts for Turning and Grooving on Hard Ferrous Materials

GITM

Utility Insert with a Polished Rake for Machining Aluminum Wheels at Medium-to-High Feeds

GDMA

Precision Back Turning Inserts, for External Machining on Swiss-Type Automatics

GIPM-A46 / GIP-1250

External NPTF (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes

ER/L-NPTF

Internal American Buttress Laydown Threading Inserts, for High Force Transmission in One Direction

IR/L-ABUT

HELI2000 WIPER insert.

HM90 APKT 1003PD-W

HELIMILL general use milling insert.

ADMT 1503PD-R-HM

Double-Sided, Flat Rake, Ceramic Inserts, for Machining Cast Iron and other Short Chipping Materials

WNGA-Ceramic

Single-Sided 80° Rhombic Insert with a Strong Cutting Edge, for Extra Rough Turning

CNMM-HR

55° Rhombic, Double-Sided, Ceramic Inserts with a T-Land, for Machining Cast Iron and Hardened Steel.

DNGA-Ceramic

Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitter

GIMM 8CC

External API - Oil Thread, Round Profile, Laydown, Threading Inserts

ER/L-API RD

Internal Thread Profile Inserts for the Aircraft and Aerospace Industry

IR/L-UNJ

Insert for High Feed Milling

APKT 1003R8T-FF

80° Rhombic, Double-Sided Inserts, for Rough Turning Applications

CNMM-NR

CBN Inserts, Full Radius for Turning and Grooving on Hard Ferrous Materials

GITM (Full Radius)

External BUT - Oil Thread Profile, Laydown, Threading Inserts, for Buttress Casing

ER/L-BUT

Internal MJ ISO 5855 Metric, Full Profile, Laydown Threading Inserts, for the Aviation and Aerospace Industry

IR-MJ

HELIMILL flat rake inserts with a variety of corner radii, used for profiling and for specific corner dimensions.

ADCA 1503..R

Double-Sided 80° Rhombic Insert, for Rough Turning on Stainless Steel and Soft Materials

CNMG-MR

External API - Oil Thread Profile, Laydown, Threading Inserts

ER/L-API

Internal NPT (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes

IR/L-NPT

External Threading Inserts for the Electrical Industry

ER/L-PG

Internal NPTF (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes

IR/L-NPTF

Precision Inserts for Grooving

GIP

External EL - Extreme Line, Oil Thread Profile, Laydown, Threading Inserts

ER-EL

Internal API - Oil Thread, Round Profile, Laydown, Threading Inserts

IR/L-API RD

Precision Inserts for External Grooving Next to a Shoulder

GIP-RX/LX

External/Internal Partial Profile 55° (U-type) Laydown Threading Inserts

UEIR/L-55

Internal BUT - Oil Thread Profile, Laydown, Threading Inserts, for Buttress Casing

IR/L-BUT

Precision Inserts, Full Radius for Grooving

GIP (Full Radius)

External/Internal Partial Profile 60° (U-type) Laydown Threading Inserts

UEIR/L-60

Internal API - Oil Thread Profile, Laydown, Threading Inserts

IR/L-API

External/Internal Whitworth Full Profile (BSW, BSF, BSP) Laydown Threading Inserts

UEIR/L-W

Internal Thread Profile Inserts for the Electrical Industry

IR/L-PG

Precision Inserts for External Grooving

GIP (W<M)

Internal EL - Extreme Line, Oil Thread Profile, Laydown, Threading Inserts

IR-EL

Precision Inserts, Full Radius for External Grooving

GIP (Full Radius)(W<M)

Precision Ground Inserts for Machining Aluminum

GIPA (W=3-6)

Precision Inserts for Machining of Cast Iron

GIA-K (W=3-6)

Мы находимся:	Россия, г. Москва
E-mail:	info@e-consul.ru

Телефон:	(495) 916-77-77, 995-96-96
Факс:	(495) 916-79-37, 916-79-73 (+112)